MCI Telecommunications internetMCI Security Group Report Title: iMCI MIIGS Security Alert Report Name: Vulnerability in metamail Report Number: iMCISE:IMCICERT:052197:01:P1R1 Report Date: 05/21/97 Report Format: Formal Report Classification: MCI Informational Report Reference: http://www.security.mci.net Report Distribution: iMCI Security, MCI Internal Internet Gateway Security (MIIGS), MCI Emergency Alert LiSt (MEALS) (names on file) -------------------------------------------------------------------------- -----BEGIN PGP SIGNED MESSAGE----- ============================================================================ CERT* Advisory CA-97.14 Original issue date: May 21, 1997 Last revised: -- Topic: Vulnerability in metamail - ----------------------------------------------------------------------------- The CERT Coordination Center has received reports of a vulnerability in metamail, a program that implements MIME. By exploiting the vulnerability, a sender of a MIME-encoded electronic mail message can cause the receiver of the message to execute an arbitrary command if the receiver processes the message using the metamail package. If the attacker has an account on the target user's local system or if the target user's system supports AFS or another distributed filesystem, then the attacker can arrange for the arbitrary command to be one the attacker created. This affects versions of metamail through 2.7 (the current version). The CERT/CC team recommends installing a vendor patch, if one is available, patching metamail yourself, or disabling metamail (see Section III). We will update this advisory as we receive additional information. Please check our advisory files regularly for updates that relate to your site. - ----------------------------------------------------------------------------- I. Description Multipurpose Internet Mail Extensions (MIME) is a standard format for extended Internet electronic mail. The MIME format permits email to include enhanced text, graphics, and audio in a standardized and interoperable manner. MIME is described in RFCs 2045 through 2049. metamail is a package that implements MIME (note: metamail can be obtained from ftp://ftp.funet.fi/pub/unix/mail/metamail/mm2.7.tar.Z). Using a configurable "mailcap" file, metamail determines how to treat blocks of electronic mail text based on the content as described by email headers. Some popular packages for handling electronic mail have hooks that allow metamail to be called automatically while a message is being processed. A condition exists in metamail in which there is insufficient variable checking in some support scripts. By carefully crafting appropriate message headers, a sender can cause the receiver of the message to execute an arbitrary command if the receiver processes the message using the metamail package. II. Impact A sender of a MIME encoded mail message can cause the receiver to execute an arbitrary command. If the attacker has an account on the target user's local system or if the target user's system supports AFS or another distributed filesystem, then the attacker can arrange for the arbitrary command to be one the attacker created. III. Solution If your vendor supplies metamail with its distribution, then install a patch from your vendor (Solution A). If your vendor does not distribute metamail with their products or does not have a patch available, use the workaround in Solution B. An alternative for those with sufficient expertise is to patch the metamail scripts as described in Solution C. A. Install a patch from your vendor, if appropriate The vendors we have heard from so far are listed below, with details in Appendix A. We will update the appendix as we receive more information. Cray Research - A Silicon Graphics Company Digital Equipment Corporation FreeBSD, Inc. Hewlett-Packard Company IBM Corporation Linux NEC Corporation Silicon Graphics Inc. Solbourne Sun Microsystems, Inc. B. Disable metamail scripts To disable the metamail scripts, remove the execute permissions from the scripts that are located in the mm2.7/src/bin directory of metamail v2.7 (the latest version of metamail). Remember that, depending on your installation of metamail, the scripts may be located in other directories in your operating system. C. Patch metamail yourself Sites that need to use metamail and have the expertise may wish to patch the scripts that are part of the metamail distribution. Note that the guidance below is supplied as is, and you need to be sure that you understand the impact (if any) that your modifications will have on metamail functionality. The scripts referred to in the following material are all located in the mm2.7/src/bin directory of metamail v2.7 (the latest version of metamail). They may be located in other directories in your operating system. 1. Ensure that parameters supplied to the scripts do not contain any white space. Using showexternal as an example, add the following code before any argument processing: # Check argument integrity. Don't trust mail headers switch ("$1$2$3$4$5$6$7") case "*[\t ]*": echo "Illegal white space in arguments\!" echo "Command was:" echo "'$0' '$1' '$2' '$3' '$4' '$5' '$6' '$7'" exit 2 endsw Add this code to the showexternal script at the very least, prior to any argument processing within that script. We encourage you to add this code to other scripts in mm2.7/src/bin directory to ensure that arguments in those scripts also exclude white space. You may need to adapt the code for your particular system. Note that this patch may affect functionality in cases (such as filenames) where parameters may have legitimately included white space. This step addresses the problem referred to in this advisory. As part of a more generally secure programming practice, please also consider the following modifications. 2. Ensure that script parameter references are quoted. For instance, in showexternal, change this line: set name=$3 to set name="$3" This should be done for every reference to a command line argument in each of the scripts. Note that csh has a :q operator which is also intended for this purpose. If you prefer, you can use this operator in each case instead of quoting. 3. Any variables in these scripts that take their value (either directly or indirectly) from a script parameter should also be quoted where necessary. For instance, in the showexternal script, change the line get $name $NEWNAME to get "$name" "$NEWNAME" Also change the following line: if ($NEWNAME != $name) then to if ("$NEWNAME" != "$name") then Similarly, there will be other instances where $name specifically, and other variables in general, should be quoted. The reason is that these variables take their value from the script parameters (for example, $name takes its value from $3, and $NEWNAME may take its value from $name). As before, the :q operator can be used in each case. Note that in doing this step, some care will be required. 4. Make sure that users have an appropriate umask set for directory and file creation. Although the value is subject to local restrictions, you may want to use a default value of 027 (depending upon the local environment). 5. Make sure that users have an appropriate value set for the environment variable METAMAIL_TMPDIR. This environment variable tells metamail where to create the temporary files it needs while processing. If the variable is not set in the user's environment, the default value is /tmp. Since /tmp is accessible by all users, it is possible that use of this value will allow exploitation of race conditions. We recommend setting the value to a protected directory belonging to the user. 6. To ensure that the METAMAIL_TMPDIR is used properly and in a secure manner, consider modifications along the following lines, using the showexternal scripts as an example. These modifications should reflect and reinforce the suggestions outlined in the previous two items, namely that the temporary directory metamail uses should be protected and accessible only by the user. Note that the following code fragments are for example only, and sites should adapt this code according to local requirements. Change these lines: if (! $?METAMAIL_TMPDIR) then set METAMAIL_TMPDIR=/tmp endif to # Set a sensible value for the temporary directory, if its not # already set. If TMPDIR is set previously, then we will # assume it is adequately protected. if (! $?METAMAIL_TMPDIR) then if ($?TMPDIR) then set METAMAIL_TMPDIR="$TMPDIR" else set METAMAIL_TMPDIR=~/metamail_tmp endif endif # Set a sensible umask value umask 077 # Make sure that the temporary directory is available if (! -d "$METAMAIL_TMPDIR") then if (! -e "$METAMAIL_TMPDIR") then mkdir "$METAMAIL_TMPDIR" else echo "$METAMAIL_TMPDIR exists, but is not a directory" exit 2 endif if ( $status != 0 || ! -d "$METAMAIL_TMPDIR" ) then echo "Error creating $METAMAIL_TMPDIR" exit 2 endif endif ........................................................................... Appendix A - Vendor Information Below is a list of the vendors who have provided information for this advisory. We will update this appendix as we receive additional information. If you do not see your vendor's name, please contact the vendor directly or use the workaround in Section III. Cray Research - A Silicon Graphics Company ========================================== Cray Research does not ship metamail as part of either Unicos or Unicos/mk. Digital Equipment Corporation ============================= SOURCE: 19.MAY.1997 Digital Equipment Corporation Software Security Response Team Copyright (c) Digital Equipment Corporation 1997. All rights reserved. This reported problem is not present for Digital's ULTRIX or Digital UNIX Operating Systems Software. - DIGITAL EQUIPMENT CORPORATION FreeBSD, Inc. ============= If you installed the metamail package or port then you are vulnerable. All released versions of FreeBSD including 2.2.2R have this flaw in them. The port was corrected as of May 30, 1997. Either update your system from a more recent port, or apply the patches contained in this advisory to those files affected. Hewlett-Packard Company ======================= HP-UX is vulnerable; patches are in progress. IBM Corporation =============== Not vulnerable, metamail is not shipped as part of AIX. IBM and AIX are registered trademarks of International Business Machines Corporation. Linux ===== Debian: Debian uses its own bourne shell based metamail scripts not the standard ones. Red Hat: All versions of Red Hat are vulnerable. A replacement RPM is available at ftp://ftp.redhat.com/pub/redhat/updates/4.1/i386/metamail-2.7-7.i386.rpm NEC Corporation =============== UX/4800 Not vulnerable for all versions. EWS-UX/V(Rel4.2MP) Not vulnerable for all versions. EWS-UX/V(Rel4.2) Not vulnerable for all versions. UP-UX/V(Rel4.2MP) Not vulnerable for all versions. EWS-UX/V(Rel4.0) Not vulnerable for all versions. UP-UX/V Not vulnerable for all versions. Silicon Graphics Inc. ===================== At this time, Silicon Graphics does not have any public information for the metamail issue. Silicon Graphics has communicated with CERT and other external security parties and is actively investigating this issue. When more Silicon Graphics information (including any possible patches) is available for release, that information will be released via the SGI security mailing list, wiretap. For subscribing to the wiretap mailing list and other SGI security related information, please refer to the Silicon Graphics Security Headquarters website located at: http://www.sgi.com/Support/Secur/security.html Solbourne ========= We do not ship the utility. We do not anticipate providing a patch, since we do not ship the utility. Sun Microsystems, Inc. ====================== Sun does not ship metamail with any of our platforms. Sun has no plans to produce patches. - ----------------------------------------------------------------------------- The CERT Coordination Center staff thanks Olaf Kirch for contributing code to the solution section and thanks BSDI and FreeBSD for their input on the solution. - ----------------------------------------------------------------------------- If you believe that your system has been compromised, contact the CERT Coordination Center or your representative in the Forum of Incident Response and Security Teams (see http://www.first.org/team-info/). CERT/CC Contact Information - ---------------------------- Email cert@cert.org Phone +1 412-268-7090 (24-hour hotline) CERT personnel answer 8:30-5:00 p.m. EST(GMT-5) / EDT(GMT-4) and are on call for emergencies during other hours. Fax +1 412-268-6989 Postal address CERT Coordination Center Software Engineering Institute Carnegie Mellon University Pittsburgh PA 15213-3890 USA Using encryption We strongly urge you to encrypt sensitive information sent by email. We can support a shared DES key or PGP. Contact the CERT/CC for more information. Location of CERT PGP key ftp://info.cert.org/pub/CERT_PGP.key Getting security information CERT publications and other security information are available from http://www.cert.org/ ftp://info.cert.org/pub/ CERT advisories and bulletins are also posted on the USENET newsgroup comp.security.announce To be added to our mailing list for advisories and bulletins, send email to cert-advisory-request@cert.org In the subject line, type SUBSCRIBE your-email-address - --------------------------------------------------------------------------- * Registered U.S. Patent and Trademark Office. Copyright 1997 Carnegie Mellon University This material may be reproduced and distributed without permission provided it is used for noncommercial purposes and the copyright statement is included. The CERT Coordination Center is part of the Software Engineering Institute (SEI). The SEI is sponsored by the U.S. Department of Defense. - --------------------------------------------------------------------------- This file: ftp://info.cert.org/pub/cert_advisories/CA-97.14.metamail http://www.cert.org click on "CERT Advisories" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Revision history -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBM4NRyHVP+x0t4w7BAQEeNwP+MnjRTzWaozPtnZJAMk+CgIZIJDeS69ne IkVKVsYy0UvmCiR+CsJQvtb7ieHKm0DLbKhv4Y6mJNB4qpqq0uTcMQUdC9+L2sqI fFUQ0n0fbtNWO47VopesCcEnhm1XTy8z/S6jADdE4NC5GmQh22AZX6RId9AXiqgK 9YlV/RvE81o= =HzE+ -----END PGP SIGNATURE-----